< HOME >                            

 

 

! This page will no longer be updated, the new page is located at: http://www.networkersupport.de

! Diese Seite wird nicht mehr weiter aktulisiert, da sie auf http://www.networkersupport.de umzieht.


Private Sammlung von EMC/Legato Networker Patches - Private Collection of EMC/Legato Networker Patches

! Dies ist keine offizielle Liste von EMC / Legato ! This is NOT an official list from EMC / Legato !

Alle Downloads und deren Einsatz auf eigene Gefahr ! All downloads and usage at your own risk !

Sie sollten zuerst mit EMC/Legato Rücksprache halten vor deren Einsatz !

You should first get in contact with EMC/Legato to ask, if you can use this Patches  !

 

Last Update 25.September.2006  Special thanks go to Manju and Sachhin !!!!
Novell Client 7.2.x

!Take care about yellow text line!

Above this line, everything is for 7.20.0 Client

Below this line, everything is for 7.02.1 Client

 

Do not mix the modules !!

 

Also some patches for Server and some tools from EMC/Legato.

For 7.20 only !

7.2 LGTpa83539 - combo

20.12.2005

This Combo patch fixes the following issues.

LGTpa81165 - networker client 7.2 for netware is not UTF-8 aware
LGTpa81289 - Fix up NetWare 4.22 CFI :enable fast browsing with 7.2
NetWareClient
LGTpa81524 - Client 7.2 for Netware find function
LGTpa81567 - save continues to run after savegrp stops/ hangs when unloaded
LGTpa81861 - Netware 7.2 client skips path > 256 chars
LGTpa80996 - NDS backup always request volumes in the Default pool
For 7.20 only !

7.2 LGTpa84291 - combo 2

11.1.2006 (January)

This Combo patch fixes the following issues.

LGTpa81165 - networker client 7.2 for netware is not UTF-8 aware

LGTpa81289 - Fix up NetWare 4.22 CFI :enable fast browsing with 7.2

NetWareClient

LGTpa81524 - Client 7.2 for Netware find function

LGTpa81567 - save continues to run after savegrp stops/ hangs when unloaded

LGTpa81861 - Netware 7.2 client skips path > 256 chars

LGTpa80996 - NDS backup always request volumes in the Default pool

LGTpa83675 - savegrp reports an over 1TB backup as it was 1000 times less

LGTpa82378 - Cannot run multiple SaveFS for multiple Virtual Volumes

LGTpa81861 - cannot backup pathnames longer than 256 chars

LGTpa81642 - Unable to stop novell scheduled backups

For 7.20 only !

7.2 LGTpa85096-combo3

01.3.2006 (march)

 

LGTpa83096:Port of LGTpa83990 to NetWortker for NetWare client 7.2

LGTpa84882: Buffer overflows in nsrexecd command execution request

This Combo patch fixes the following issues.

LGTpa81165 - networker client 7.2 for netware is not UTF-8 aware

LGTpa81289 - Fix up NetWare 4.22 CFI :enable fast browsing with 7.2

NetWareClient

LGTpa81524 - Client 7.2 for Netware find function

LGTpa81567 - save continues to run after savegrp stops/ hangs when unloaded

LGTpa81861 - Netware 7.2 client skips path > 256 chars

LGTpa80996 - NDS backup always request volumes in the Default pool

LGTpa83675 - savegrp reports an over 1TB backup as it was 1000 times less

LGTpa82378 - Cannot run multiple SaveFS for multiple Virtual Volumes

LGTpa81861 - cannot backup pathnames longer than 256 chars

LGTpa81642 - Unable to stop novell scheduled backups

LGTPa85096 - Port of LGTpa83990 to NetWortker for NetWare client 7.2

LGTpa84882 - Buffer overflows in nsrexecd command execution request

LGTpa84466 - NetWorker A NetWare System abends during recovery

LGTpa84510 - save' cannot parse a Input file with non-english characters.

For 7.20 only !

7.2 LGTpa84466

27.1.2006

LGTpa84466 NetWorker A NetWare System abends during recovery

Affected Binary:

Networkr.nlm

recover.nlm

 

Please apply this patch on top of combo LGTpa 84291

For 7.20 only !!

7.2 LGTpa85075

LGTpa85075 - NetWorker Bug in Networkr.nlm during directed restore with FQDN clients

This patch built on top LGTpa85096 - Port of LGTpa83990 to NetWortker for NetWare client 7.2
7.2.1 Client All Clients and Patches for 7.2.1 below
Networker Client 7.2.1 for Netware

 

Documentation is also available, via :

Administrator´s Guide
http://web1.legato.com/infodev/publications/NetWorker/NetWare/7.2.1/nwag_7.2.1.pdf

Installation Guide
http://web1.legato.com/infodev/publications/NetWorker/NetWare/7.2.1/cpnwig_7.2.1.pdf

Release Notes
http://web1.legato.com/infodev/publications/NetWorker/NetWare/7.2.1/nwrs_7.2.1.pdf

 

7.2.1 LGTpa88764

29.8.2006

LGTpa88764: verbose ouput for NDS save set.

The fixed binary : save.nlm

Should be applied on top of the 7.2.1.
7.2.1 LGTpa89631-networker

17.8.2006

1>networkr.nlm
2>recover.nlm

These two binaries contains the fixes for
LGTpa89631:After applying LGTpa85075 NetWare server crashes during recovery
LGTpa90019: REGRESS:Recover.nlm does not list files with filenames starting with period.

Patch should be applied on top of 7.2.1 release
Networker Server patches Patches for the Networker Server (Solaris 64Bit) in Relation to Netware
7.2.2 LGTpa90067_LGTpa87725 Server and Client Patch all OS

1.9.2006

LGTpa90067 + LGTpa87725 patch for SCSI timeout (up to 60 seconds) and virtual tape libarys

(prevents out of sync, because rap database get updated on command and not on answer of command)

7.2.2 Server Solaris LGTpa90348

25.9.2006

LGTpa90348: Restart of group containing Netware clients doesn't work.

Fix:Problems in savegrp binary in solaris Networker 7.2.2

Fixed binary : savegrp

Please rename and replace the savegrp from /usr/sbin with new one

! You must change the rights with CHMOD to 555
 
Tools for Netware Tool´s for Netware from EMC/Legato

findfiles.nlm

 

20.1.2006

 

This is a tool to be able to create a list of files on the Novell Server with a special type of extension and be able to backup this filetype with the save -I sys:\FilesFND.txt command

CLI Switches fro findfiles:

-q quiet mode

-c Ignore case sensitivity

-e followed by ".xxx" for the type of files you like to select. (this command must be always the last)

It creates in the sys: Volume a File FilesFND.txt

The Tool runs an Netware 6.0 and 6.5, i never tested it on older Versions of Netware

The Tool is also UTF-8 aware !

 

finddirs.nlm (bugfixed findfiles.nlm)

31.7.2006

With the old findfiles.nlm it can happen, that on a huge amount of files to scan (> 1.5millions) there happens a stack overflow and because of that a abend of the netware box.

Finddirs.nlm has a bigger stack to fix this.

Same CLI Switches as findfiles.nlm above

Novell Client 4.22 4.22 LGTpa67534

15.4.2005

Patch 4.22b
4.22 LGTpa71574

26.4.2005

Patch 4.22e (Problem with public Symbols after applying TSAUP16 or higher)
4.22 LGTpa74792

18.8.2005

Security Patch
Files from Novell for Networker Problems libc.nlm from 20.12.2005 9.00.03 libc.nlm Patch about RPC Error (bsdsock.nlm downgrade to 6.59j workaround)

Novell TID 3529670

Version 9.00.03 Dienstag, 20. Dezember 2005
Copyright (c) 1999-2006 by Novell, Inc. All rights reserved.
Standard C Runtime Library for NLMs [unauthorized, optimize

libc.nlm from 26.01.2006 NEW libc.nlm Patch about RPC Error Version 2

Version 9.00.03 Donnerstag, 26. Januar 2006
Copyright (c) 1999-2006 by Novell, Inc. All rights reserved.
Standard C Runtime Library for NLMs [unauthorized, debuggin

 

TSAUP19 from 28.3.2006 New TSA Versions http://support.novell.com/cgi-bin/search/searchtid.cgi?/2973487.htm
nwlib6f.exe libc Patch

17.03.2006

 

 

See the TID http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=10100368&sliceId=&dialogID=1673847&stateId=0 0 1679074
Backups fail to complete

error from SAVE log file - SYS:dir1 SAVE.NLM: RPC error: RPC send operation failed.  A
network connection could not be established with the host. (severity 4,
number 3)

And the TID for the lib6f.exe http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=InfoDocument-2973452&sliceId=&dialogID=1673847&stateId=0%200%201679074

Unfortunatly it did not solve the RPC Problem ! There is still a escalation with EMC and Novell open.

The EMC/Legato Escalation Number is LGTpa90213

seg.nlm V2.0 beta

23. Sep. 2005

Good Tool from Novell to monitor and documentate memory consuming by different nlm´s and hints for optimization
nwlib6h.exe latest libc  libc6h.exe

Also included in OES SP2 Update 1

nw65sp5upd1.exe

31.7.2006

See also the TID http://www.novell.com/support/search.do?cmd=displayKC&docType=kc&externalId=InfoDocument-2974185&sliceId=&dialogID=1400272&stateId=1%200%201398843

Saveset All is not working after changing something with the Volumes (Dismount, Rename, create, delete)

The Patch Collection and/or libc6h.exe DID solve the problem ! See also EMC NEtworker Bug description LGTPA85513

Open Escalations with EMC/Legato about Networker Problems without a patch till now Memory leak on restore

LGTPA85075

If you do a directed recover, the networker first needs 11kb per file which is selected in the memory of the novell server for the networker.nlm and then, if the marking is finished and you start the restore, the recover.nlm did the same again.

If you use cli (only recover.nlm) the same happens twice with recover.nlm

In both cases, if you have not enought memory in the netware server, you can not restore all files. Example: 3.3 Million Files need 2 Times 950 MB avail. memory int  the ram, otherwise the server abends.

Nevertheless that there is a patch in the meantime (included in 7.2.1 Client) the memory per file what is needed is round about 195 Byte in the memory of the netware server when you mark the files. So this can limit your restore possibility on huge file servers!

Example: 2.2 Million Files consuming 428 MB of Memory. On a Fileserver with 512 MB this will crash the server, because not enought memory will be avail for other needed NLM´s

   
RPC Errors on Backup

LGTpa90213

There is since Months a escalation with Novell and EMC open LGTpa90213
   

(c) A. Eckert Contact me here with any new hints, patches and other relevant stuff.

Futter für die Suchmaschinen: Networker, Legato, EMC, Novell, Netware, Networker Client for Netware, RPC, LGTpa, Backup, Restore, recover